Add a new Observation on an Object in a Model

The purpose of this article is to discover how to pin an observation to an Object in a Model using the Mobile application.

  1. Open the desired project
  2. Click Models
  3. Navigate and open the desired model(s)
  4. Use mobile gestures to navigate the model:
    • Orbit (drag with 1 finger)
    • Pan (drag with 2 fingers)
    • Zoom in (pinch open with 2 fingers)
    • Zoom out (pinch close with 2 fingers)
    • Select object (tap with 1 finger)
  5. Make sure the Observation icon is selected
  6. Hold your finger down on the screen in the desired location of the observation

 

Note

Alternative: You can also select an object and click the icon object_observation_icon.png to add a new observation 

 

  1. If this is the first observation you are raising from your session, you will be prompt to select the Issuer and the Phase, then click Continue

    Add_a_new_Obs.png

  2. Enter all the required information (description, position, assignee, due date, photo, etc.)
  3. Click Save upon completion

    Add_a_new_Obs_2.png

  4. Repeat the process until you finish your inspection
  5. All observations will be pinned to the model and contain one important piece of information:

    • Status color (in this example, Red is for Raised)

      Add_a_new_Obs_3.png

Note

Once you finished your inspection and you have a stable internet connection, remember to synchronize your work so your data is available on the Web Application 

 

Was this article helpful?
0 out of 0 found this helpful

Need further help? Contact our Support Team