Drawing Code

Since the TP CDE platform is not a classic filing structure with folders, but a database-oriented system with search filters, it is necessary to name Drawing files according to a filename scheme.

This ensures that you can quickly find the drawing you are looking for in the project and that the current version (highest index) of a drawing is always displayed.

mceclip6.png

Here you will find your project room-specific drawing numbering scheme

The specific drawing code of your project room can be found either in the left navigation bar under "Drawing Code" (sometimes also under "Help" in the 'Downloads' tab, along with further instructions).
mceclip8.png
mceclip9.png

Application of drawing code

The drawing code is a combination of properties with which a drawing can be uniquely identified via the file name. When you upload a drawing, the system reads out the individual abbreviations and can therefore display the corresponding full names.
mceclip10.png

Please follow the following steps to successfully name your drawing:

 

  • Different values ​​are stored in the system for each property (creator, service phase, etc.). You can find these in the overview exactly below the property. To code your drawing, select an appropriate abbreviation for each property.
    • Use the appropriate abbreviation for each column.
    • Adhere to the abbreviations shown in the overview for the property. No number / no letter / no column may be omitted.
    • Do not create your own values. If you cannot find a desired value for the correct naming, contact your project administrator. Individual abbreviations with the corresponding full description can possibly be added within the columns.
  • The properties are separated from each other with an underscore "_" or a minus sign "-". You can see which separator is used in your project in the project-specific scheme.
  • Please do not leave out any properties when naming. Interchanging or adding properties would, in addition to omitting them, lead to an error message in the system. And you will not be able to upload your drawing

 

Example for file naming: B5_3_ELT_DA_001_A_V

 

You can read about how to find a drawing in the project in our article on search options.

How to upload a drawing is explained to you in the following article.

Cet article vous a-t-il été utile ?
Utilisateurs qui ont trouvé cela utile : 0 sur 1

Vous avez besoin d'aide? Contactez notre équipe de support